Jay Family Creations Nano Matrix-3D Bed Adhesive

Eliminate warped corners and failed prints for good with Jay Family Creations Premium 3D Printer Bed Adhesive. Custom-formulated and small-batch blended right here in-house, this professional-grade liquid adhesive creates an optically clear, heat-activated bond between your filament and build plate. Engineered explicitly for engineering-grade materials like ABS, ASA, Nylon, and PETG, it locks your first layer down flat when hot and releases your completed parts automatically once the bed cools to room temperature.

• Nano Matrix Thermal Bonding: Delivers immense structural bonding force at high temperatures (60°C to 110°C), keeping sharp corners and heavy print geometries perfectly flat on the bed.
• Automatic Part Release: No more scraping or gouging expensive build surfaces with sharp putty knives. Once the print bed drops to room temperature, the adhesive film naturally lets go, allowing your completed models to pop off with a gentle click.
• Sacrificial Bed Protection: Acts as a safe, micro-thin structural barrier to protect smooth PEI sheets and glass plates from permanent chunk damage caused by aggressive materials like PETG and TPU fusing directly to the surface.
• Sponge-Valve Precision Applicator: Features a mess-free, built-in sponge dauber tip that glides smoothly across the bed. Completely eliminates airborne hairspray lacquer mist that gums up your printer's linear rails, belts, and fans.
• Water-Soluble Cleanliness: Dries into a perfectly smooth film that transfers a clean matte texture to the bottom of your printed parts. Cleans up effortlessly by wiping the plate down with a warm, damp cloth or rinsing under a water tap.
• • Filament Compatibility: PLA, PETG, ABS, ASA, TPU, Nylon, and Polycarbonate.
  • Surface Compatibility: Glass, Smooth PEI, Textured PEI, BuildTak, and Garolite.
  • Bottle Size: 100ml / 3.4 fl oz (Yields up to 100+ full-bed applications).
  • How to Use: Shake well. Press the sponge applicator tip firmly against a cold, clean build plate to engage the internal fluid valve. Apply a thin, uniform layer across the printing area. Heat your bed to 60°C or higher to lock in your filament. Let the plate cool completely to room temperature before part removal.
  • Manufacturing Origin: Proudly compiled, small-batch blended, and bottled in South Elgin, IL.